
Tapered Osteotomes
Straight and Angled Designs.


There are four straight and four angled Tapered Osteotome sizes available.
The sizes correspond with the diameters of ZimVie Dental Tapered Implants (3.25 mm, 4.0 mm, 5.0 mm and 6.0 mm diameters).
- Angled design has a 30o Offset
- Straight design
The depth markings are machine etched into the matte finished tip surface. This enhances depth line visibility, makes the depth line permanent, and reduces the possibility of corrosion on the operating tip.
Tapered Osteotomes Features & Benefits
- Striking end of the Osteotome
- The ball at the striking end of the osteotome is forgiving of off-angled mallet strikes, delivering force in a linear vector to the operating end.
- Operating end of the Osteotome
- The depth lines are aligned to indicate crestal placement of the Certain and Ex Hex Tapered Implants.

Straight and Angled Osteotomes
Resources
Three Simple Steps to Better Dental Care
Unless otherwise indicated, as referenced herein, all trademarks and intellectual property rights are the property of ZimVie Inc. or an affiliate; and all products are manufactured by one or more of the dental subsidiaries of ZimVie Inc. (Biomet 3i, LLC, Zimmer Dental, Inc., etc.) and marketed and distributed by ZimVie Dental and its authorized marketing partners. For additional product information, please refer to the individual product labeling or instructions for use. Product clearance and availability may be limited to certain countries/regions. This material is intended for clinicians only and does not comprise medical advice or recommendations. Distribution to any other recipient is prohibited. This material may not be copied or reprinted without the express written consent of ZimVie. ZV1676 REV A 10/23 ©2023 ZimVie Inc. All rights reserved.